This High-Performance attractive rubberized floor coating is a wise investment for any structure that needs protection from wear or abuse.
An attractive, non-skid coating that provides optimum traction for residential and commercial applications.
Our coating is an industrial rubberized coating that is slip resistant, highly durable and 100% waterproof. The coating is created through a unique process of cross-linking urethanes, acrylics and copolymers, utilizing recycled rubber crumb as aggregate.
The standard textured rubberized coating is a very tough yet flexible non-slip coating that is ideal for pool decks, splash pads, wood decks and commercial applications.
The fine textured coating is recommended for commercial kitchen floors, locker rooms, commercial bathrooms and food prep areas that are needed to be suitable for mopping. A variation of this coating is available for underwater applications such as fountains and pool interiors.
The heavy textured coating is designed for heavy industrial installations. Created with a course 14-mesh rubber, it is ideal for heavy industrial and marine use such as refineries, oil rigs, loading docks, fishing boats, ships and ramps. It is only available in Black, Dark Gray, Dark Blue, Dark Green and Dark Brown.
The standard and fine textured coatings are available in 21 standard colors (custom color matching is also available): Light Blue, Medium Blue, Caribbean Blue, Waterpark Blue, Dark Blue, White, Key West Sand, Sand, Tan, Dark Brown, Olive Green, Dark Green, Green, Safety Yellow, Safety Orange, Red, Brick Red, Light Gray, Medium Gray, Dark Gray and Black.
The rubberized floor coating is a state of the art acrylic/urethane copolymer with recycled rubber crumb as the aggregate. The environmentally friendly coating is extremely durable and designed to adhere to most substrates with excellent abrasion and chemical resistance rendering them non-slip. It contains no VOC’s, is odorless and typical thickness is approximately 30-40 mils.
The rubberized floor coating is very flexible making it chip and impact resistant. It will handle wear from foot traffic to forklift traffic and automotive traffic. It is an air dry, air cure coating and it is non-flammable. It cures as a result of a cross linking process and evaporation, and therefore is dry to the touch in approximately 30 minutes per coat. Light traffic is possible after 10-12 hours and hard dry in 24 hours.
The coating is generally applied at a minimum of 40-50 square feet per gallon for non-heavy commercial applications, and 35 square feet per gallon for heavy industrial applications. The desired thickness is achieved in two coats for most non-heavy commercial applications and in three coats for heavy industrial applications.
The rubberized non-slip floor coating is the perfect solution to correct slippery surfaces. Steps and ramps are good examples of where this problem commonly occurs. Many times non-slip tread tape is applied. This rarely corrects the problem and the tape wears off overtime. The non-slip tread tape is also not esthetically pleasing. Our coating is the ideal solution to slippery surfaces and can be applied to aluminum, steel, wood and fiberglass . It provides optimum traction on ramps, stairs, pool decks, splash pads, locker rooms and commercial/industrial areas.
Our rubberized floor coating will chemically and permanently bond to most surfaces. These include but are not limited to concrete, wood, asphalt, fiberglass, metal, rubber, ceramic tiles, porcelain tiles, composite decking, terrazzo, brick and stone.
It can be used in areas where high chemical resistance is required and caustic washdowns are done. This coating is a great alternative to ripping up leaking ceramic tiles over a finished area, or replacing a failed pool decking or a cool deck surface.
Our floor coating is no affected by extreme temperatures and will not peel or chip up. It has extreme bonding capabilities and cannot be removed from concrete, tiles, rubber or wood by any other means than mechanical grinding or shotblasting. It is waterproof, resistant to acid, chemicals, UV exposure and saltwater.
It is an excellent choice for commercial kitchen floors that are subject to oil and grease spills and impacts from dishes, pans and pots. It is especially suited for food processing surfaces where daily wash downs and sanitation is of extreme importance. It provides a non-slip, stain resistant and high impact resistant flooring solution.
Rubberized flooring is quickly becoming a very popular concrete flooring option for many settings that require a non-slip and extremely durable flooring surface. Rubberized flooring provides benefits that other flooring options simply cannot match up to. Rubberized floor coatings are a quick and long term solution for anyone looking to invest in a permanent flooring solution.